Onguard Starling Commercial Gate 60H x 96W
- Aluminum Gate
- Flat Top Rail
- Welded Frame
- Self Closing Hinges Included
- Gravity Latch Included
- Commercial Grade
- Additional information
Starling Commercial Grade Aluminum Gate 60H x 96W
Onguard Starling Commercial aluminum gate is made to fit a 8 foot opening between posts. Starling commercial gates have a flat top rail to match the 60 inch tall Starling commercial aluminum fence panels. Onguard gates have a welded frame for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard commercial gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. Commercial grade Starling gates at 10 feet wide have a cross bar to strengthen the gate.
Starling Arched and Double Gates
Arched gates are an option for Onguard commercial Starling. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.
Aluminum Pool Fence Gate
Starling commercial gate at 96 inches comes with a welded U frame and a cross bar. The cross bar is welded on to strengthen the gate and can not be removed. This gate might not make local pool codes due to the crossbar. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.
Installing a 60H x 96W Starling Commercial Gate
Onguard gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and Onguard installation guides provide more information on installing gates.
1 pair of Heavy Duty Aluminum Hinges are included with each gate leaf.
- Powder coated
- Aluminum gate
- Pet panel option available
- Made overseas
- Welded frame
- Self closing hinges included
- Limited lifetime warranty
- Arched gates available
- Commercial grade
- Gravity latch included if no magnetic latch is purchased
- Used with Onguard Starling 60H commercial fence panels
Starling Commercial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.
|Dimensions||96 × 60 in|
Black, Bronze, White