Onguard Starling Commercial Fence Panel 48H
$86.14 – $151.23
- Aluminum Fence Panel
- Powder Coated
- Flat Top Rail
- Commercial Grade Fence
- Panel Specifications
- Additional information
Onguard Starling Commercial Aluminum Fence Panel 48″
Onguard Starling Commercial aluminum fence panel is 48 inches tall and comes in 72.5″ or 96″ widths. Starling is a three rail fence that comes with a smooth flat top rail. Onguard Commercial Starling fence panels come in pre-assembled pre-cut heights and widths that can be easily trimmed down with a hacksaw or reciprocating saw. Commercial Starling aluminum fence panels can support 300 lbs of pressure on the top rail. Onguard Commercial fence panels are powder coated which will prevent peeling and cracking, and is a high quality alternative to standard paint. Powder coating will keep your fence looking great for many years unlike having to paint an iron or steel fence every so often. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
Starling Commercial fence at 48 inches tall does not make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. Commercial Starling fence in 54 inches tall or higher should make most pool codes. Check your local building codes for pool code requirements in your area.
Commercial Grade Aluminum Pet Fence
Onguard Commercial Starling panels at 48 inches tall have the option of adding a puppy panel or pet picket to the bottom of a fence panel. These pet panels are welded onto the fence panel before powder coating. Pet panel picket spacing is 1 5/8 inches which will keep pets safe in your yard and other animals out. Starling fence will not make pool code if the pet panel is added.
Onguard Starling Commercial 48H Fence Panel Racking
Onguard commercial Starling 6 foot wide fence panels can rack about 4 inches per six foot panel. Commercial 8 foot wide panels will rack about 6 inches. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched into the horizontal rails around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched” which allows a 6 foot panel to rack up to 9 inches, and an 8 foot panel 18 inches. Another option is “Triple Punching” which allows racking up to 16 inches per six foot panel, and 28 inches per eight foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Rust and maintenance free
- 48 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 300 lbs
- Trim to size
- Commercial grade
- Good for home and commercial applications
Starling Commercial Grade posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard Commercial aluminum fence.
- 48 inches high by 72.5 or 96 inches wide
- Pickets are 3/4″ sq. x .050″ thick.
- Rail Topwalls are 1-3/4″ x .062″ thick.
- Rail Sidewalls are 1-1/4″ x .080″ thick.
- Picket spacing is 3 -5/8 inches.
- Pet Panel spacing is 1- 1/2 inches.
Black, Bronze, White
72.5 Inches, 99 Inches