Specrail Saybrook Industrial Gate 96H x 84W
- Aluminum Gate
- Welded Frame
- Flat Top Rail
- Self Closing Hinges Included
- Industrial Grade
- Additional information
Specrail Saybrook Industrial Aluminum Gate 96H x 84W
This Specrail Saybrook industrial grade aluminum gate is 96 inches tall by 84 inches wide and made to fit an 84 inch opening between gate posts. Saybrook gates have a flat top rail to match 96 inch tall Saybrook four rail aluminum fence panels. Specrail gates have a welded frame for strength and durability and welded corner gussets which strengthen the gate and keep it from sagging over time. The gate pickets slot down through pre-punched holes in the middle of the horizontal rails. Specrail gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. There is an option for a pet panel to be welded onto the gate before powder coating. This pet panel is a great way to keep your pets safe, while keeping other animals out. You have an option of adding small and large scrolls to a Saybrook gate for a more decorative and distinctive appearance.
A latch is not included with this gate, purchase a Specrail magnetic latch if your gate needs to be pool code compliant.
Aluminum Pool Fence Gate
Specrail Saybrook gates at 96 inches tall should make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.
This gate with the pet picket option will not make most pool codes due to the spacing between horizontal rails.
Saybrook Arched and Double Industrial Gates
Arched gates are an option for Specrail Saybrook industrial 96 inch tall gates. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Drop rods are included with Specrail double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.
Installing a 96H x 84W Saybrook Gate
Specrail 84 inch wide gates are made to fit an 84 inch opening between gate posts. Actual gate size is 70.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Specrail installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Welded frame
- Self closing hinges included
- Limited lifetime warranty
- Arched gates available
- Pet panel available
- Industrial grade
- Used with Specrail Saybrook 96H industrial fence panels
Specrail industrial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail industrial aluminum gates.
|Dimensions||84 × 96 in|
Black, Bronze, White