Specrail Saybrook Gate 54H x 36W
$194.40 – $304.40
- Aluminum Gate
- Welded Frame
- Flat Top Rail
- Pool Code Gate
- Self Closing Hinges Included
- Additional information
Specrail Saybrook Aluminum Gate 54H x 36W
This Specrail Saybrook aluminum gate is 54 inches tall by 36 inches wide and made to fit a 36 inch opening between gate posts. Saybrook gates have a flat top rail to match 54 inch tall Saybrook aluminum fence panels. Specrail gates have a welded frame for strength and durability and welded corner gussets which strengthen the gate and keep it from sagging over time. The gate pickets slot down through pre-punched holes in the middle of the horizontal rails. Specrail gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Specrail gate is also named under the Storrs style of fences made to make most local pool codes.
A latch is not included with this gate, purchase a 10 inch Specrail magnetic latch if your gate needs to be pool code compliant.
Aluminum Pool Fence Gate
Specrail Saybrook gates at 54 inches tall should make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.
Saybrook Arched and Double Gates
Arched gates are an option for Specrail Saybrook gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Drop rods are included with Specrail double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.
Installing a 54H x 36W Saybrook Gate
Specrail 36 inch wide gates are made to fit a 36 inch opening between gate posts. Actual gate size is 34.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Specrail installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Welded frame
- Self closing hinges included
- Limited lifetime warranty
- Arched gates available
- Pet panel available
- Used with Specrail Saybrook 54H fence panels
Fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail aluminum gates.
|Dimensions||36 × 54 in|
Black, Bronze, White