Specrail Falcon Gate 48H x 72W

Specrail Falcon Gate 48H x 72W

$285.30$395.30

  • Aluminum Gate
  • Welded Frame
  • Pressed Spears
  • Double Pickets
  • Aluminum Pet Gate
  • Self Closing Hinges Included
SKU: SR-FC-48-72G
Clear
  • Description
  • Additional information

Specrail Falcon Aluminum Gate 48H x 72W

This Specrail Falcon aluminum gate is 48 inches tall by 72 inches wide and made to fit a 72 inch opening between gate posts. Falcon gates have pressed spears above the top rail, and double the pickets to match 48 inch tall Falcon aluminum fence panels. Falcon gates have 1 5/8 inch picket spacing, which is good for pets and privacy. Specrail gates have a welded frame for strength and durability and welded corner gussets which strengthen the gate and keep it from sagging over time. The gate pickets slot down through pre-punched holes in the middle of the horizontal rails. Specrail gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. Decorative finials are an option instead of the standard pressed spear tops. You would need 15 decorative finials to replace the pressed spear tops on this gate. Specrail will cut the pressed spears off and install the finials on the gate.

A latch is not included with this gate, purchase a Specrail latch to complete your gate.

Falcon Arched and Double Gates

Arched gates are an option for Specrail Falcon gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Drop rods are included with Specrail double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.

Installing a 48H x 72W Falcon Gate

Specrail 72 inch wide gates are made to fit a 72 inch opening between gate posts. Actual gate size is 70.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Specrail installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Aluminum Pet Gate
  • Used with Specrail Falcon 48H fence panels

Falcon fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail aluminum gates.

Additional information

Weight27 lbs
Dimensions72 × 48 in
Color

Black, Bronze, White

Arched

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)