Specrail Derby Gate 48H x 60W

Specrail Derby Gate 48H x 60W

$215.20$325.20

  • Aluminum Gate
  • Welded Frame
  • Flat Top Rail
  • Pool Code Gate
  • Self Closing Hinges Included
SKU: SR-DB-48-60G
Clear
  • Description
  • Additional information

Specrail Derby Aluminum Gate 48H x 60W

This Specrail Derby aluminum gate is 48 inches tall by 60 inches wide and made to fit a 60 inch opening between gate posts. Derby gates have a flat top rail to match 48 inch tall Derby aluminum fence panels. Specrail gates have a welded frame for strength and durability and welded corner gussets which strengthen the gate and keep it from sagging over time. The gate pickets slot down through pre-punched holes in the middle of the horizontal rails. Specrail gates are powder coated for a maintenance free, rust proof finish. Derby fence and gates at 48 inches tall are made to make most local aluminum pool fence codes.

A latch is not included with this gate. Purchase a 20″ Specrail magnetic pool latch to make pool code.

Aluminum Pool Fence Gate

Specrail Derby gates at 48 inches tall should make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.

Derby Arched and Double Gates

Arched gates are an option for Specrail Derby gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Drop rods are included with Specrail double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.

Installing a 48H x 60W Derby Gate

Specrail 60 inch wide gates are made to fit a 60 inch opening between gate posts. Actual gate size is 58.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Specrail installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Pet panel available
  • Used with Specrail Derby 48H fence panels

Fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail aluminum gates.

Additional information

Weight11 lbs
Dimensions60 × 48 in
Color

Black, Bronze, White

Arched

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)