Specrail Corner Post 72H – Horizon
$30.00 – $47.00
- Aluminum Corner Post
- Powder Coated
- Post Cap Included
- Used with 72H Horizon Panels
- Additional information
Corner Post for 72H Specrail Horizon
This corner post is used with 72 inch tall Horizon aluminum fence panels. Specrail corner posts are installed when you need a 90 degree angle on a fence run. A corner post has pre-routed holes punched on two sides of the post to attach two fence panels. Aluminum fence panels have a short section on the horizontal rails that will slot into the pre-routed holes on the post. Use the provided powder coated stainless steel screws to secure the fence panel onto the post. Specrail posts, panels, and gates, are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. Actual post height is 100 inches. Standard residential post size is 2 x 2 , but 2.5 x 2.5 size is also an option for larger and thicker walled posts.
Installing a 72H Corner Post
There are a couple methods you can use to install Specrail 100 inch tall corner posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 100 inches, which will allow two feet to go into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of the fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add a little gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes.
- Powder coated
- Aluminum post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.060″
- 2.5 x 2.5 wall thickness is 0.075″
- Used with Specrail Horizon 72H fence panels
Horizon fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Specrail posts.
Black, Bronze, White