Specrail Blank Post 60H – Bennington
$23.00 – $42.00
- Aluminum Blank Post
- Powder Coated
- 84 Inches Tall
- Post Cap Included
- Additional information
Blank Post for 60H Specrail Bennington
This blank post is used with 60 inch tall Bennington aluminum fence panels. A blank post is commonly used when you need to make angles other than 90 degrees or when stair stepping fence panels are required. Use angle brackets one one side of the post to angle the fence panel, and wall brackets to attach the fence panel to a longer blank post to stair step. Standard post caps are included with all Specrail posts. Specrail posts, panels, and gates, are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. Actual post height is 84 inches which provides two feet extra to cement into the ground. Standard residential post size is 2 x 2 , but 2.5 x 2.5 size is also an option for larger and thicker walled posts.
Installing a 60H Blank Post
There are a couple methods you can use to install Specrail 84 inch tall blank posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 84 inches, which will allow two feet to go into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of the fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add a little gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes.
- Powder coated
- Aluminum blank post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.060
- 2.5 x 2.5 wall thickness is 0.075
- Used with Specrail Bennington 60H fence panels
Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Specrail posts.
|Dimensions||84 × 2 × 2 in|
Black, Bronze, White