Specrail Blank Post 36H – Falcon
$21.00 – $88.86
- Aluminum Blank Post
- Powder Coated
- 70 Inches Tall
- Post Cap Included
- Additional information
Blank Post for 36H Specrail Falcon
This blank post is used with 36 inch tall Falcon aluminum fence panels. A blank post is commonly used when you need to make angles other than 90 degrees or when stair stepping fence panels are required. Use angle brackets one one side of the post to angle the fence panel, and wall brackets to attach the fence panel to a longer blank post to stair step. Standard post caps are included with all Specrail posts. Specrail posts, panels, and gates, are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. Actual post height is 70 inches which provides two feet extra to cement into the ground. Standard residential post size is 2 x 2 , but 2.5 x 2.5 size is also an option for larger and thicker walled posts.
Installing a 36H Blank Post
There are a few methods you can use to install 36H blank posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 70 inches, which will allow almost two feet to go into the ground. If you want to mount the posts on a hard surface, you have the options of a base mount, welded base mount, or core drilling into the hard surface. Welded base mounts are added by Specrail after cutting down the post to fit a 36H Falcon panel. Mounting bolts are not included and can be purchased at a local hardware store.
- Powder coated
- Aluminum blank post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.060″
- 2.5 x 2.5 wall thickness is 0.075″
- Used with Specrail Falcon 36H fence panels
Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Specrail posts.
|Dimensions||70 × 2 × 2 in|
Black, Bronze, White
|Welded Base Mount|