Specrail Berkshire Industrial Gate 42H x 42W

Specrail Berkshire Industrial Gate 42H x 42W


  • Aluminum Gate
  • Welded Frame
  • Pressed Spear Pickets
  • Self Closing Hinges Included
  • Industrial Grade

Specrail Berkshire Industrial Aluminum Gate 42H x 42W

This Specrail Berkshire industrial aluminum gate is made to fit a 42 inch opening between gate posts. Berkshire gates have alternating height pressed spear top pickets. This gate will match 42 inch tall Berkshire Industrial aluminum fence panels. Specrail gates have a welded frame for strength and durability. This gate also has welded corner gussets which keep it from sagging over time. The alternating pressed spear pickets slot down through pre-punched holes in the middle of the horizontal rails. Specrail gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. There is an option for a pet panel to be welded onto the gate before powder coating. This pet panel is a great way to keep your pets safe, while keeping other animals out.

A latch is not included with this gate, purchase a Specrail latch to complete your gate.

Berkshire Industrial Arched and Double Gates

Arched gates are an option for Specrail Berkshire industrial gates and are made up to 72 inches wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Drop rods are included with double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.

Decorative Finials

Decorative finials are an option instead of the standard pressed spear tops. You would need 7 decorative finials to replace the pressed spear tops on this gate. Specrail will cut the pressed spears off and install the finials on the gate.

Installing a 42H x 42W Berkshire Industrial Gate

Specrail 42 inch wide gates are made to fit a 42 inch opening between gate posts. Actual gate size is 40.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and Specrail installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Pet panel available
  • Industrial grade
  • Alternating spear top pickets
  • Used with Specrail Berkshire 42H industrial fence panels

Specrail industrial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail industrial aluminum gates.

Additional information

Weight10 lbs
Dimensions42 × 42 in

Black, Bronze, White


No, Yes

Pet Panel

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)