Specrail Bennington Industrial Gate 96H x 180W-EH
$2,070.45 – $2,335.33
- Aluminum Gate
- Welded Frame
- Spear Top Pickets
- Industrial Grade
- 15 Foot Wide Gate
- Additional information
Specrail Bennington Industrial Aluminum Gate 96H x 180W
This Specrail Bennington industrial grade aluminum gate is 96 inches tall by 180 inches wide and made to fit a 15 foot opening between gate posts. Bennington gates have pressed spear top pickets that match 96 inch tall Bennington four rail industrial grade aluminum fence panels. Specrail gates have a welded frame for strength and durability and welded corner gussets which strengthen the gate and keep it from sagging over time. The aluminum pickets slot down through pre-punched holes in the middle of the horizontal rails. Specrail gates are powder coated for a maintenance free, rustproof finish. The finish is between shiny and matte. You have the option of adding decorative finials to a Bennington gate for a more decorative and distinctive appearance.
A latch is not included with this gate, purchase a Specrail magnetic latch if your gate needs to be pool code compliant.
Aluminum Pool Fence Gate
Specrail Saybrook gates at 96 inches tall should make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.
This gate with the pet picket option will not make most pool codes due to the spacing between horizontal rails.
Bennington Double Industrial Gates
You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Drop rods are included with Specrail double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.
Installing a 96H x 180W Bennington Gate
Specrail 180 inch wide gates are made to fit a 180 inch opening between gate posts. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommended to use blank gate posts when installing between columns. FenceTown help articles and Specrail installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Welded frame
- Self closing hinges included
- Limited lifetime warranty
- Industrial grade
- 15 foot wide gate
- Used with Specrail Saybrook 96H industrial fence panels
Specrail industrial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail industrial aluminum gates.
|Dimensions||180 × 96 in|
Black, Bronze, White