Onguard Siskin Commercial Gate 72H x 48W
$253.64 – $390.36
- Aluminum Gate
- Flat Top Rail
- Welded Frame
- Self Closing Hinges Included
- Gravity Latch Included
- Commercial Grade
- Additional information
Onguard Siskin Commercial Aluminum Gate 72H x 48W
This Onguard Siskin commercial grade aluminum gate is made to fit a 49.5 inch opening between posts. This gate matches 72 inch tall Siskin commercial aluminum fence panels. Siskin gates come with a smooth flat top rail with alternating pressed spears between the top two rails. The alternating pressed spears provide a more decorative look. Onguard gates have a welded frame for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard commercial gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. There is an option for a pet panel to be welded onto the gate before powder coating. This pet panel is a great way to keep your pets safe, while keeping other animals out.
Siskin Commercial Arched and Double Gates
Arched gates are an option for commercial grade Siskin and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.
You have an option of using decorative finials instead of the standard pressed spears. This Siskin commercial gate has 5 spear top vertical pickets so you will need 5 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Installing a 72H x 48W Siskin Commercial Gate
Onguard commercial gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns.
- Powder coated
- Commercial grade
- Aluminum gate
- Made overseas
- Welded frame
- Gravity latch included
- Self closing hinges included
- Limited lifetime warranty
- Arched gates available
- Pet panel available
- Used with Onguard Siskin 72H Commercial fence panels
Siskin commercial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.
|Dimensions||48 × 72 in|
Black, Bronze, White