Onguard Siskin Commercial Gate 54H x 72W

Onguard Siskin Commercial Gate 54H x 72W


  • Aluminum Gate
  • Flat Top Rail
  • Welded Frame
  • Self Closing Hinges Included
  • Commercial Grade
  • Pool Code Gate

Onguard Siskin Commercial Aluminum Gate 54H x 72W

This Onguard Siskin commercial grade aluminum gate is made to fit a 73.5 inch opening between posts. This gate matches 54 inch tall Siskin commercial aluminum fence panels. Siskin gates come with a smooth flat top rail with alternating pressed spears between the top two rails. The alternating pressed spears provide a more decorative look. Onguard gates have a welded frame for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard commercial gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte.

Commercial Aluminum Pool Gates

Onguard commercial Siskin at 54 inches tall is made to make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. This gate has a thicker welded frame so no cross bar is needed to keep the gate from sagging. The bottom horizontal rail is dropped with no pickets extending past it. This gate does not have a pet panel option so it will make most pool codes. Check your local building codes for pool code requirements in your area. Purchase a magna latch or magnetic latch to make this gate pool code compliant.

Siskin Commercial Arched and Double Gates

Arched gates are an option for commercial grade Siskin and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.

Decorative Finials

You have an option of using decorative finials instead of the standard pressed spears. This Siskin commercial gate has 8 spear top vertical pickets so you will need 8 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.

Installing a 54H x 72W Siskin Commercial Gate

Onguard commercial gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns.

  • Powder coated
  • Commercial grade
  • Aluminum gate
  • Made overseas
  • Welded frame
  • Gravity latch included if no magnetic latch is purchased
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Used with Onguard Siskin 54H commercial fence panels

Siskin commercial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.

Additional information

Weight15 lbs
Dimensions72 × 54 in

Black, Bronze, White


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)