Onguard Willet Gate 72H x 72W

Onguard Willet Gate 72H x 72W


  • Aluminum Gate
  • Convex Gate
  • Welded Frame
  • Self Closing Hinges Included
  • Gravity Latch Included
SKU: OG-WT-72-72G

Onguard Willet Aluminum Gate 72H x 72W

This Onguard Willet aluminum gate fits a 73.5 inch opening between posts. This gate matches 72 inches tall Willet aluminum fence panels and has four horizontal rails. Willet comes with rounded top pressed spear pickets in a convex pattern that provides security and the look of a wrought iron or steel fence. The concave pressed spears offer a more decorative look. Onguard gates have a welded frame for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard gates are powder coated for a maintenance free, rustproof finish. The finish is between shiny and matte. There is an option for a welded on pet panel for the bottom of the fence panel. This pet panel is a great way to keep your pets safe while keeping other animals out.

Arched and Double Gates

Willet arched gates will look like Onguard Longspur arched gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.

Decorative Finials

You have the option of using decorative finials instead of the standard pressed spears. This Willet gate has 15 spear top vertical pickets, so you will need 15 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.

Installing a 72H x 72W Willet Gate

Onguard gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. Our help articles and Onguard installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made overseas
  • Welded frame
  • Gravity latch included
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Pet panel available
  • Used with Onguard Willet 72H fence panels

Willet fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.

Additional information

Weight27 lbs
Dimensions72 × 72 in

Black, Bronze, White


No, Yes

Pet Panel

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)