Onguard Willet Gate 57H x 72W

Onguard Willet Gate 57H x 72W

$230.28$323.86

  • Aluminum Gate
  • Convex Gate
  • Welded Frame
  • Self Closing Hinges Included
SKU: OG-WT-57-72G
Clear
  • Description
  • Additional information

Onguard Willet Aluminum Gate 57H x 72W

This Onguard Willet aluminum gate is made to fit a 73.5 inch opening between posts. This gate matches 57 inch tall Willet aluminum fence panels. Willet comes with rounded top pressed spear pickets in a convex pattern that provides security and the look of a wrought iron or steel fence. The concave pressed spears provide a more decorative look. Onguard pool code gates have a welded “U frame” for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte.

You have an option of using decorative finials instead of the standard pressed spears. This Willet gate has 15 spear top vertical pickets so you will need 15 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.

Aluminum Pool Fence Gates

Onguard Willet at 57 inches tall is made to make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. This gate has a welded U frame so no cross bar is needed to keep the gate from sagging. The bottom horizontal rail is dropped with no pickets extending past it. This gate does not have a pet panel option so it will make most pool codes. Check your local building codes for what the requirements are to make pool code in your area. Purchase a magna latch or magnetic latch to make this gate pool code compliant.

Willet Arched and Double Gates

Willet arched gates will look like Onguard Longspur arched gates. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.

Installing a 57H x 72W Willet Gate

Onguard gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and Onguard installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made overseas
  • Welded U frame
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Used with Onguard Willet 57H fence panels
  • Gravity latch included if no pool code magnetic latch is purchased.

Willet fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.

Additional information

Weight21.5 lbs
Dimensions72 × 57 in
Color

Black, Bronze, White

Arched

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)