Onguard Siskin Fence Panel 72H x 72.5W
$88.06 – $126.34
- Aluminum Fence Panel
- Powder Coated
- Flat Top Rail
- Decorative Spears
- Aluminum Pet Fence
- Panel Specifications
- Additional information
Onguard Siskin Aluminum Fence Panel 72″ x 72.5″
Onguard Siskin aluminum fence panel is 72 inches high by 72.5 inches wide. Siskin comes with a smooth flat top rail with alternating pressed spears between the top two rails. The alternating pressed spears provide a more decorative look. Onguard fence panels are powder coated, which will keep your fence looking great for many years, unlike having to paint an iron or steel fence every so often. Onguard Siskin fence panels come in pre-assembled pre-cut heights and widths that you can trim down with a hacksaw or reciprocating saw. This Onguard Siskin aluminum fence panel is residential grade that can support 350 lbs of pressure on the top rail. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
Aluminum Pool Fence
Onguard Siskin at 72 inches should make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. This fence style in 54 inches tall or higher should make most pool codes. Check your local building codes for the requirements to make pool code in your area.
Aluminum Pet Fence
Siskin fence has the option of a welded on puppy panel or pet picket to the bottom of the fence panel. These pet panels are not removable. Pet panel picket spacing is 1 5/8 inches which will keep pets safe in your yard and other animals out.
You have the option of using decorative finials instead of the standard pressed spears. Siskin has 8 spear top vertical pickets, so you will need 8 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Onguard Siskin 72H Fence Panel Racking
Residential grade fence panels from Onguard can rack about 4 inches per six foot panel. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched,” which allows it to rack up to 9 inches per 6 foot panel. Another option is “Triple Punching,” which allows racking up to 16 inches per six foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Rust and maintenance free
- 72 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 350 lbs
- Trim to size
- Residential grade
- 4 Horizontal Rails
- Good for home and light commercial applications
Siskin posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard aluminum fence.
- 72 inches high by 72.5 inches wide
- Pickets are 5/8 inch sq. x .050 inch thick
- Rail Topwalls are 1 1/8 inch x .062 inch thick.
- Rail Sidewalls are 1 inch x .080 inch thick.
- Picket spacing is 3 13/16 inches.
- Pet Panel spacing is 1 5/8 inches.
- 4 Horizontal Rails
|Dimensions||72 × 72 in|
Black, Bronze, White