Onguard Longspur Fence Panel 48H x 72.5W
$61.28 – $98.43
- Aluminum Fence Panel
- Powder Coated
- Pressed Spear Tops
- Aluminum Pet Fence
- Panel Specifications
- Additional information
Onguard Longspur Aluminum Fence Panel 48″ x 72.5″
Onguard Longspur aluminum fence panel is 48 inches high by 72.5 inches wide. Longspur comes with rounded top pressed spear pickets which provide security and the look of a wrought iron or steel fence. Onguard fence panels are powder coated which will prevent peeling and cracking, and is a high quality alternative to standard paint. Powder coating will keep your fence looking great for many years unlike having to paint an iron or steel fence every so often. Onguard Longspur fence panels come in pre-assembled pre-cut heights and widths that can be easily trimmed down with a hacksaw or reciprocating saw. This Onguard Longspur aluminum fence panel is residential grade that can support 250 lbs of pressure on the top rail. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
You have an option of using decorative finials instead of the standard pressed spears. Longspur has 15 vertical pickets so you will need 15 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Longspur fence at 48 inches tall does not make most local pool codes. Most pool codes require 45 inches in-between the two innermost horizontal rails. Longspur fence style in 57 inches tall or higher should make most pool codes. Check your local building codes for pool code requirements in your area.
Aluminum Pet Fence
Onguard fence panels have the option of adding a puppy panel or pet picket to the bottom of a fence panel. These pet panels are welded onto the fence panel before powder coating. Pet panel picket spacing is 1 5/8 inches which will keep pets safe in your yard and other animals out.
Onguard Longspur 48H Fence Panel Racking
Onguard residential fence panels can rack about 4 inches per six foot panel. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched into the horizontal rails around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched” which allows it to rack up to 9 inches per 6 foot panel. Another option is “Triple Punching” which allows racking up to 16 inches per six foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Rust and maintenance free
- 48 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 250 lbs
- Trim to size
- Residential grade
- Good for home and light commercial applications
Longspur posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard aluminum fence.
- 48 inches high by 72.5 inches wide
- Pickets are 5/8 inch sq. x .050 inch thick
- Rail Topwalls are 1 1/8 inch x .062 inch thick.
- Rail Sidewalls are 1 inch x .080 inch thick.
- Picket spacing is 3 13/16 inches.
- Pet Panel spacing is 1 5/8 inches.
|Dimensions||72 × 48 in|
Black, Bronze, White