Onguard Line Post 54H – Starling
$20.43 – $79.86
- Aluminum Line Post
- Powder Coated
- Post Cap Included
- Used with 54H Starling Panels
- Additional information
Line Post for 54H Onguard Starling
This line post is used with 54 inch tall Starling aluminum fence panels. Onguard line posts are installed in the middle of two aluminum fence panels. Line posts have pre-routed holes punched on opposite sides to attach a fence panel on both ends. Line posts are used for connecting two fence panels in a straight run and come with screws to secure the fence panel onto the post. The end of a fence panels horizontal rails slot into the pre-routed holes on the post. This aluminum line post provides two feet extra to cement into the ground. Standard post caps are included with Onguard line posts. Onguard posts, panels, and gates, are powder coated for a maintenance free, rust proof finish.The finish is in-between shiny and matte. Actual post height is 84 inches. Standard residential post size is 2 x 2 , but 2.5 x 2.5 size is also an option for larger looking posts.
Installing a Line Post
There are a couple methods you can use to install Onguard line posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 84 inches, which will allow two feet to go into the ground. If you want to mount the posts on a hard surface, you have the option of a welded base mount, or core drilling into the hard surface. Welded base mounts are attached by Onguard after cutting down the post to fit a 54H Starling fence panel. Mounting bolts are not included and can be purchased at a local hardware store.
- Powder coated
- Aluminum line post
- Made overseas
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.06 to 0.08
- Used with Onguard Starling 54H fence panels
Starling fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Onguard line posts.
|Dimensions||84 × 2 × 2 in|
Black, Bronze, White
|Welded Base Mount|