Onguard Kestral Fence Panel 57H x 72.5W
- Aluminum Fence Panel
- Powder Coated
- Pressed Spear Tops
- Aluminum Pool Fence
- Panel Specifications
- Additional information
Onguard Kestral Aluminum Fence Panel 57″ x 72.5″
Onguard Kestral aluminum fence panel is 57 inches high by 72.5 inches wide. Kestral comes with alternating pressed spear pickets, which provide security and the look of a wrought iron or steel fence. Onguard fence panels are powder coated that will keep your fence looking great for many years, unlike having to paint an iron or steel fence every so often. Onguard Kestral fence panels come in pre-assembled pre-cut heights and widths that you can trim down with a hacksaw or reciprocating saw. This Onguard Kestral aluminum fence panel is residential grade that can support 350 lbs of pressure on the top rail. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
A pet panel is not an option for Kestral at 57 inches tall. The pet panel would keep the fence panel from making most pool codes. This fence is specifically made to make most pool codes.
Aluminum Pool Fence
Onguard Kestral at 57 inches will make most local swimming pool fence codes. Most pool codes require 45 inches between the two innermost horizontal rails. The bottom bar is dropped with no pickets extending past it. Check your local building codes for the requirements to make pool code in your area. Purchase a 10 inch tall magna latch or magnetic latch to make this gate pool code compliant.
You have the option of using decorative finials instead of the standard pressed spears. Kestral has 15 vertical pickets, so you will need 15 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Onguard Kestral 57H Fence Panel Racking
Residential fence panels from Onguard can rack about 4 inches per six foot panel. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched” which allows it to rack up to 9 inches per 6 foot panel. Another option is “Triple Punching” which allows racking up to 16 inches per six foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Aluminum Pool Fence
- Rust and maintenance free
- 57 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 350 lbs
- Trim to size
- Residential grade
- Good for home and light commercial applications
Kestral posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard aluminum fence.
- 57 inches high by 72.5 inches wide
- Pickets are 5/8 inch sq. x .050 inch thick
- Rail Topwalls are 1 1/8 inch x .062 inch thick.
- Rail Sidewalls are 1 inch x .080 inch thick.
- Picket spacing is 3 13/16 inches.
|Dimensions||72 × 57 in|
Black, Bronze, White