Onguard Ibis Fence Panel 72H x 72.5W
$93.80 – $132.09
- Aluminum Fence Panel
- Powder Coated
- Pressed Spear Tops
- Concave Fence Panel
- Aluminum Pet Fence
- Panel Specifications
- Additional information
Onguard Ibis Aluminum Fence Panel 72″ x 72.5″
Onguard Ibis aluminum fence panel 72 inches tall by 72.5 inches wide. Ibis comes with rounded top pressed spear pickets in a concave pattern that provides security and the look of a wrought iron or steel fence. Onguard fence at 72 inches tall has four horizontal rails to add strength to the panel. All Onguard fence panels are powder coated, which will keep your fence looking great for many years, unlike having to paint an iron or steel fence every so often. Onguard Ibis fence panels come in pre-assembled pre-cut heights and widths that you can trim down with a hacksaw or reciprocating saw. This Onguard aluminum fence panel is residential grade and can support 350 lbs of pressure on the top horizontal rail. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
Aluminum Pool Fence
Onguard Ibis at 72 inches will make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. This fence style at 57 inches tall or higher should make most pool codes. Check your local building codes for the requirements to make pool code in your area.
Aluminum Pet Fence
Ibis panels at 72 inches tall have the option of adding a welded on puppy panel or pet picket to the bottom of the fence panel. These pet panels are not removable. Pet panel picket spacing is 1 5/8 inches, which will keep pets safe in your yard and other animals out.
You have the option of using decorative finials instead of the standard pressed spears. Ibis has 15 vertical pickets, so you will need 15 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Onguard Ibis 72H Fence Panel Racking
Residential fence panels from Onguard can rack about 4 inches per six foot panel. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched,” which allows it to rack up to 9 inches per 6 foot panel. Another option is “Triple Punching,” which allows racking up to 16 inches per six foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Rust and maintenance free
- 72 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 350 lbs
- Trim to size
- Residential grade
- Aluminum pet fence option
- Good for home and light commercial applications
Ibis posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard aluminum fence.
- 72 inches high by 72.5 inches wide
- Pickets are 5/8 inch sq. x .050 inch thick
- Rail Topwalls are 1 1/8 inch x .062 inch thick.
- Rail Sidewalls are 1 inch x .080 inch thick.
- Picket spacing is 3 13/16 inches.
- Pet Panel spacing is 1 5/8 inches.
- 4 Horizontal Rails
|Dimensions||72 × 72 in|
Black, Bronze, White