Onguard Ibis Fence Panel 57H x 72.5W
- Aluminum Fence Panel
- Powder Coated
- Pressed Spear Tops
- Aluminum Pool Fence
- Panel Specifications
- Additional information
Onguard Ibis Aluminum Fence Panel 57″ x 72.5″
Onguard Ibis aluminum fence panel is 57 inches high by 72.5 inches wide. Ibis comes with rounded top pressed spear pickets in a concave pattern that provides a decorative look to the fence panel. Onguard fence panels are powder coated which will prevent peeling and cracking, and is a high quality alternative to standard paint. Powder coating will keep your fence looking great for many years unlike having to paint an iron or steel fence every so often. Onguard Ibis fence panels come in pre-assembled pre-cut heights and widths that can be easily trimmed down with a hacksaw or reciprocating saw. This Onguard Ibis aluminum fence panel is residential grade that can support 250 lbs of pressure on the top rail. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
You have an option of using decorative finials instead of the standard pressed spears. Ibis has 15 vertical pickets so you will need 15 finials. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
A pet panel is not an option for Ibis at 57 inches tall. The pet panel would keep the fence panel from making most pool codes. This fence is specifically made to make most pool codes.
Aluminum Pool Fence
Onguard Ibis at 57 inches will make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. The bottom bar is dropped with no pickets extending past it. Check your local building codes for the requirements to make pool code in your area. Purchase a 10 inch tall magna latch or magnetic latch to make this gate pool code compliant.
Onguard Ibis 57H Fence Panel Racking
Onguard residential fence panels can rack about 4 inches per six foot panel. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched into the horizontal rails around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched” which allows it to rack up to 9 inches per 6 foot panel. Another option is “Triple Punching” which allows racking up to 16 inches per six foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Aluminum Pool Fence
- Rust and maintenance free
- 57 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 250 lbs
- Trim to size
- Residential grade
- Good for home and light commercial applications
Ibis posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard aluminum fence.
- 57 inches high by 72.5 inches wide
- Pickets are 5/8 inch sq. x .050 inch thick
- Rail Topwalls are 1 1/8 inch x .062 inch thick.
- Rail Sidewalls are 1 inch x .080 inch thick.
- Picket spacing is 3 13/16 inches.
|Dimensions||72 × 57 in|
Black, Bronze, White