Onguard End Post 54H – Starling
$20.43 – $79.86
- Aluminum End Post
- Powder Coated
- Post Cap Included
- Used with 54H Starling Panels
- Additional information
End Post for 54H Onguard Starling
This end post is used with 54 inch tall Starling aluminum fence panels. Onguard end posts are installed at the end of a fence run, commonly when your fence run ends next to a structure like a house. End posts are also used when you need an angle other than 90 degrees. End your fence run with an end post, then attach angle brackets on a blank side of the post. You will then be able to angle a fence panel however you like and continue the fence run. Aluminum fence panels have a short section on the horizontal rails that will slot into the pre-routed holes on the post. Use the provided powder coated stainless steel screws to secure the fence panel onto the post. Onguard end posts have an option for a welded on base mount for mounting on hard surfaces. Onguard posts, panels, and gates, are powder coated for a maintenance free, rust proof finish.The finish is in-between shiny and matte. Actual post height is 84 inches. Standard residential post size is 2 x 2 , but 2.5 x 2.5 size is also an option for larger looking posts.
Installing an End Post
There are a couple methods you can use to install 54H end posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 84 inches, which will allow two feet to go into the ground. If you want to mount the posts on a hard surface, you have the options of a welded base mount, or core drilling into the hard surface. Welded base mounts are added by Onguard after cutting down the end post to fit a 54H Starling panel. Mounting bolts are not included and can be purchased at a local hardware store.
- Powder coated
- Aluminum post
- Made overseas
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.06 to 0.08
- Used with Onguard Starling 54H fence panels
Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Onguard end posts.
|Dimensions||84 × 2 × 2 in|
Black, Bronze, White
|Welded Base Mount|