Onguard Corner Post 36H – Longspur
$16.71 – $72.43
- Aluminum Corner Post
- Powder Coated
- Post Cap Included
- Used with 36H Longspur Panels
- Additional information
Corner Post for 36H Onguard Longspur
This corner post is used with 36 inch tall Longspur aluminum fence panels. Onguard corner posts are installed when you need a 90 degree angle on a fence run. A corner post has pre-routed holes punched on two sides of the post to attach two fence panels. Aluminum fence panels have a short section on the horizontal rails that will slot into the pre-routed holes on the post. Use the provided powder coated stainless steel screws to secure the fence panel onto the post. Onguard corner posts have an option for a welded on base mount for mounting on hard surfaces. Onguard posts, panels, and gates, are powder coated for a maintenance free, rust proof finish.The finish is in-between shiny and matte. Actual post height is 60 inches. Standard residential post size is 2 x 2 , but 2.5 x 2.5 size is also an option for larger looking posts.
Installing a 36H Corner Post
There are a few methods you can use to install 36H Longspur corner posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 60 inches, which will allow two feet to go into the ground. If you want to mount the posts on a hard surface, you have the options of a base mount, welded base mount, or core drilling into the hard surface. Welded base mounts are added by Onguard after cutting down the end post to fit a 36H Longspur panel. Mounting bolts are not included and can be purchased at a local hardware store.
- Powder coated
- Aluminum post
- Made overseas
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.060
- Used with Onguard Longspur 36H fence panels
Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Onguard corner posts.
|Dimensions||60 × 2 × 2 in|
Black, Bronze, White
|Welded Base Mount|