Onguard Bunting Commercial Gate 60H x 48W

Onguard Bunting Commercial Gate 60H x 48W


  • Aluminum Gate
  • Double Pickets
  • Welded Frame
  • Self Closing Hinges Included
  • Gravity Latch Included

Onguard Bunting Commercial Aluminum Gate 60H x 48W

This Onguard Bunting commercial aluminum gate fits a 46.5 inch opening between gate posts. Bunting commercial gates have a flat top rail and double pickets to match 60 inches tall Bunting commercial aluminum fence panels. Bunting has 1 5/8 inch picket spacing, which is good for pet fences and privacy fences. Onguard gates have a welded frame for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This pet gate is a great way to keep your pets safe while keeping other animals out.

Aluminum Pool Fence Gates

Onguard Bunting at 60 inches tall should make most local swimming pool fence codes. Most pool codes require 45 inches between the two innermost horizontal rails. Check your local building codes for pool code requirements in your area. Purchase a Magna latch or magnetic latch to make this gate pool code compliant.

Bunting Arched and Double Gates

Arched gates are an option for 60 inch tall Onguard Bunting commercial gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.

Installing a 60H x 48W Bunting Commercial Gate

Onguard gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. Our help articles and Onguard installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made overseas
  • Welded frame
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Used with Onguard Bunting 60H commercial fence panels
  • Gravity latch included if no magnetic latch is purchased

Commercial fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.

Additional information

Weight17.50 lbs
Dimensions36 × 60 in

Black, Bronze, White


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)