Onguard Longspur Commercial Gate 48H x 72W

Onguard Longspur Commercial Gate 48H x 72W

$268.00$404.71

  • Aluminum Gate
  • Spear Top Pickets
  • Welded Frame
  • Self Closing Hinges Included
  • Commercial Grade
SKU: OG-COM-LS-48-72G
Clear

Onguard Longspur Commercial Aluminum Gate 48H x 72W

Onguard Longspur Commercial aluminum gate fits a 73.5 inch opening between posts. Longspur commercial gates have pressed spear top pickets to match the 48 inch tall Longspur commercial aluminum fence panels. Onguard gates have a welded frame for strength and durability. This Longspur gate has a crossbar that adds strength and helps keep the gate from sagging. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard commercial gates are powder coated for a maintenance free, rustproof finish. The finish is between shiny and matte. There is an option for a welded on pet panel for the bottom of the gate. This pet panel is a great way to keep your pets safe while keeping other animals out.

Commercial grade Longspur at 48 inches tall will not make most local pool codes. Longspur fence should be 57 inches tall or higher to make most pool codes. Onguard Heron fence at 48 inches tall will make most pool codes.

Longspur Commercial Arched and Double Gates

Arched gates are an option for Onguard commercial Longspur 4 foot tall gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.

Decorative Finials

You have the option of using decorative finials instead of the standard pressed spears. You would need 15 decorative finials to replace the pressed spear tops on this gate. Onguard will cut the pressed spears off the fence panels to allow the installation of the decorative finials.

Installing a 48H x 72W Longspur Commercial Gate

Onguard gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. Our help articles and Onguard installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Pet panel option available
  • Made overseas
  • Welded frame
  • Self closing hinges included
  • Limited lifetime warranty
  • Arched gates available
  • Commercial grade
  • Gravity latch included if no magnetic latch is purchased.
  • Used with Onguard Longspur 48H commercial fence panels

Commercial Longspur fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.

Additional information

Weight15 lbs
Dimensions72 × 48 in
Color

Black, Bronze, White

Arched

No, Yes

Pet Panel

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)