Onguard Longspur Commercial Fence Panel 48H
$83.57 – $146.71
- Aluminum Fence Panel
- Powder Coated
- Pressed Spear Tops
- Aluminum Pet Fence
- Commercial Grade
- Fence Panel Specifications
- Additional information
Onguard Longspur Commercial Aluminum Fence Panel 48″
Onguard Longspur Commercial aluminum fence panel is 48 inches tall and comes in 72.5″ or 96″ widths. Longspur commercial is a three rail fence that comes with pressed spear top pickets which provide security and the look of a wrought iron or steel fence. Onguard Commercial Longspur fence panels come in pre-assembled pre-cut heights and widths that can be easily trimmed down with a hacksaw or reciprocating saw. Commercial Longspur aluminum fence panels can support 300 lbs of pressure on the top rail. Onguard Commercial fence panels are powder coated which will prevent peeling and cracking, and is a high quality alternative to standard paint. Powder coating will keep your fence looking great for many years unlike having to paint an iron or steel fence every so often. Powder coated stainless steel screws are visible on one side of the fence panel where each horizontal rail meets each vertical picket. Onguard horizontal rails have a beveled design that creates a decorative look while shedding water away and adding strength.
You have an option of using decorative finials instead of the standard pressed spears. Longspur 72 inch wide panels have 15 vertical pickets so you will need 15 finials. Longspur 96 inch panels have 21 vertical pickets. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Longspur Commercial fence at 48 inches tall does not make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. Commercial Longspur fence in 57 inches tall or higher should make most pool codes. Check your local building codes for pool code requirements in your area.
Commercial Grade Aluminum Pet Fence
Onguard Longspur Commercial fence panels at 48 inches tall have the option of adding a puppy panel or pet picket to the bottom of a fence panel. These pet panels are welded onto the fence panel before powder coating. Pet panel picket spacing is 1 5/8 inches which will keep pets safe in your yard and other animals out. Longspur fence will not make pool code if the pet panel is added.
Onguard Longspur Commercial 48H Fence Panel Racking
Onguard commercial Longspur 6 foot wide fence panels can rack about 4 inches per six foot panel. Commercial 8 foot wide panels will rack about 6 inches. Racking will allow the fence panel to go up or down a hill or slope. The size of the space punched into the horizontal rails around the pickets determines how much a panel can rack. There is an option to have a fence panel “Double Punched” which allows a 6 foot panel to rack up to 9 inches, and an 8 foot panel 18 inches. Another option is “Triple Punching” which allows racking up to 16 inches per six foot panel, and 28 inches per eight foot panel. Double picket or puppy picket fence panels can rack about half the amount due to the smaller picket spacing.
- Rust and maintenance free
- 48 inches tall
- Powder coated
- Made overseas
- Pre-assembled panels
- Supports 300 lbs
- Trim to size
- Commercial grade
- Pressed spear tops
- Good for home and commercial applications
Longspur Commercial Grade posts, gates, and accessories are sold separately.
Add a fence panel to the shopping cart to see related items.
FenceTown help articles contain more information on Onguard Commercial aluminum fence.
- 48 inches high by 72.5 or 96 inches wide
- Pickets are 3/4" sq. x .050" thick.
- Rail Topwalls are 1-3/4" x .062" thick.
- Rail Sidewalls are 1-1/4" x .080" thick.
- Picket spacing is 3 -5/8 inches.
- Pet Panel spacing is 1- 1/2 inches.
Black, Bronze, White
72.5 Inches, 99 Inches