Onguard Kestral Commercial Gate 57H x 48W
$258.43 – $395.14
- Aluminum Gate
- Alternating Spear Top Pickets
- Welded Frame
- Self Closing Hinges Included
- Commercial Grade
- Additional information
Onguard Kestral Commercial Aluminum Gate 57H x 48W
Onguard Kestral Commercial aluminum gate is made to fit a 49.5 inch opening between posts. Kestral commercial gates have alternating pressed spear top pickets to match the 57 inch tall Kestral commercial aluminum fence panels. Onguard gates have a welded frame for strength and durability. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Onguard commercial gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. There is an option for a pet panel to be welded onto the gate before powder coating. This pet panel is a great way to keep your pets safe while keeping other animals out.
Aluminum Pool Fence Gates
Onguard Kestral Commercial grade gate at 57 inches tall is made to make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. The bottom horizontal rail is dropped with no pickets extending past it. Check your local building codes for pool code requirements in your area. Purchase a magna latch or magnetic latch to make this gate pool code compliant.
Kestral Commercial Arched and Double Gates
Arched gates are an option for Onguard commercial Kestral and are made up to 72” wide. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one gate closed, and pull out the drop rod when you want to open both gates.
Decorative Finials for Kestral Commercial Gates
You have the option of using decorative finials instead of the standard pressed spears. You would need 9 decorative finials to replace the alternating pressed spear tops on this gate. Onguard will cut the pressed spears off the fence panels to allow installation of the decorative finials.
Installing a 57H x 48W Kestral Commercial Gate
Onguard gates are true to size, so you will need to add 1.5 inches per gate leaf for the hinges and latch between gate posts. Install the hinges and latch with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. Our help articles and Onguard installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Pet panel option available
- Made overseas
- Welded frame
- Self closing hinges included
- Limited lifetime warranty
- Arched gates available
- Commercial grade
- Gravity latch included if no magnetic latch is purchased
- Used with Onguard Kestral 57H commercial fence panels
Commercial Kestral fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Onguard aluminum gates.
|Dimensions||48 × 57 in|
Black, Bronze, White