Jerith Style 402 Gate 36H x 48W

Jerith Style 402 Gate 36H x 48W


  • Aluminum Gate
  • Good for Pets
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
SKU: JT-402-36-48G
  • Description
  • Additional information

Jerith Style 402 Gate 36H x 48W

Jerith style 402 aluminum gate is made to fit a 48 inch opening. Style 402 gates have a flat top rail and double pickets that match the 36 inch tall style 402 aluminum fence panels. Style 402 has 1 5/8 inch picket spacing, which is good for pets and privacy. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The double pickets slot down through pre-cut holes in the middle of the horizontal rails. A style 402 48 inch wide aluminum gate fits into a 48 inch opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.

Style 402 at 36 inches tall does not make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. You would have to purchase this style in 60 inches tall or higher to make most pool codes. Check your local building codes for the requirements to make pool code in your area.

Style 402 Arched and Double Gates

Arched gates are an option for Jerith style 402 gates. Arched Gates are made up to 60” wide and Rainbow Gates cover up to a 10’ or 12’ opening. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) are used to create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates which are made from Industrial material. Estate Gates can span up to a 20’ opening.

Installing a 36H x 48W Style 402 gate

When installing a style 402 gate between two gate posts, leave an opening of 36 inches between the inside of the gate posts. Attach the hinges and latch with the provided self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Jerith installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self closing hinges included
  • Limited lifetime warranty
  • Pet and privacy gate
  • Used with Jerith style 402 36H fence panels

Fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight16.5 lbs
Dimensions48 × 36 in

Black, Bronze, White


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)