Jerith Style 401 Gate 72H x 36W

Jerith Style 401 Gate 72H x 36W

$407.93$531.41

  • Aluminum Gate
  • Pet Gate
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
SKU: JT-401-72-36G
Clear
  • Description
  • Additional information

Jerith Style 401 Gate 72H x 36W

Jerith Style 401 aluminum gate is made to fit a 36 inch opening. Style 401 gates have double picket pressed spear tops to match the 72 inch tall style 401 aluminum fence panels. Style 401 has 1 5/8 inch picket spacing, which is good for pets and added privacy. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The pressed spear pickets slot down through pre-cut holes in the middle of the horizontal rails. A style 401 36” aluminum gate fits into a 36” opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.

Aluminum Pool Fence Gates

Jerith style 401 at 72 inches tall will make most local pool codes. Standard pool code requires 45 inches between the two innermost horizontal rails. This gate in 60 inches tall or higher should make most pool codes. Check your local building codes for the requirements to make pool code in your area.

Style 401 Arched and Double Gates

Arched gates are an option for Jerith style 401 gates. Arched Gates are made up to 72” wide and Rainbow Gates cover up to a 10’ or 12’ opening. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) are used to create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates which are made from Industrial material. Estate Gates can span up to a 20’ opening.

Installing a 72H x 36W Style 401 gate

When installing a style 401 gate between two gate posts, leave an opening of 36 inches between the inside of the gate posts. Attach the hinges and latch with the provided self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Jerith installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self closing hinges included
  • Limited lifetime warranty
  • Privacy Gate
  • Pet Gate
  • Used with Jerith style 401 72H fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight21 lbs
Dimensions36 × 72 in
Color

Black, Bronze, White

Arched

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)