Jerith Style 400 Gate 42H x 48W
$343.98 – $582.12
- Aluminum Gate
- Pet Gate
- Welded Frame
- “A” Brace for Strength
- Self Closing Hinges Included
- Latch Included
- Additional information
Jerith Style 400 Aluminum Gate 42H x 48W
Jerith style 400 aluminum gate is made to fit a 48 inch opening. Style 400 gates have a flat top rail, double pickets, and alternating pressed spears that match 42 inch tall style 400 aluminum fence panels. Style 400 has 1 5/8 inch picket spacing, which is good for pets and privacy. The alternating pressed spears provide a more decorative look to this aluminum gate. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The double pickets slot down through pre-cut holes in the middle of the horizontal rails. A style 400 48 inch wide aluminum gate fits into a 48 inch opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte.
Style 400 at 42 inches tall does not make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. You would have to purchase this style in 60 inches tall or higher to make most pool codes. Check your local building codes for the requirements to make pool code in your area.
Style 400 Arched and Double Gates
Arched gates are an option and are made up to 60 inches wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) are used to create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates which are made from Industrial material. Estate Gates can span up to a 20’ opening.
Installing a 42H x 48W Style 400 gate
When installing a style 400 gate between two gate posts, leave an opening of 48 inches between the inside of the gate posts. Attach the hinges and latch with the provided self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Jerith installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Welded frame
- “A” Brace for Strength
- Locking latch included
- Self closing hinges included
- Limited lifetime warranty
- Pet and privacy gate
- Used with Jerith style 400 42H fence panels
Jerith fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.
|Dimensions||48 × 42 in|
Black, Bronze, White