Jerith Style 202 Gate 60H x 60W

Jerith Style 202 Gate 60H x 60W


  • Aluminum Gate
  • Flat Top Rail
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
SKU: JT-202-60-60G

Jerith Style 202 Gate 60H x 60W

Jerith Style 202 aluminum gate is made to fit a 60-inch opening. Style 202 gates have a flat top rail to match 60-inch tall style 202 aluminum fence panels. Jerith gates have a welded frame for strength and durability and a half-inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Jerith’s 60 inch wide gates fit into a 60” opening between posts. Jerith gates are powder coated for a maintenance-free, rustproof finish. The finish is between shiny and matte.

Style 202 Arched and Double Gates

Arched gates are an option for Jerith style 202 gates. Arched Gates are made up to 60” wide, and Rainbow Gates cover up to a 10’ or 12’ opening. For larger openings, use our more decorative Estate Gates, which are made from industrial grade material. Estate Gates can span up to a 20’ opening. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates.

Installing a 60H x 60W Style 202 gate

When installing a style 202 gate between two gate posts, leave an opening of 60 inches between the inside of the gate posts. You install the hinges and latch with the provided self-tapping screws. If you are installing this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To install the gate in the middle of a column, you will need to build a shim that will allow the hinges to be installed so a gate can swing open. If possible, it is recommended to use blank gate posts when installing between columns. Our help articles and Jerith installation guides provide more information on installing gates.

  • Powder-coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self-closing hinges included
  • Limited lifetime warranty
  • Used with Jerith style 202 60H fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight19 lbs
Dimensions60 × 60 in

Black, Bronze, White


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)