Jerith Style 202 Gate 54H x 36W

Jerith Style 202 Gate 54H x 36W

$355.50$453.36

  • Aluminum Gate
  • Pool Code Gate
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Pool Latch Included
SKU: JT-202-54-36G
Clear

Jerith Style 202 Gate 54H x 36W

Jerith Style 202 aluminum gate is made to fit a 36 inch opening. Style 202 gates have a flat top rail to match 54 inch tall style 202 aluminum pool fence panels. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Style 202 36 inch wide gates fit into a 36 inch opening between gate posts. Jerith gates are powder coated for a maintenance free, rustproof finish. The finish is between shiny and matte.

Aluminum Pool Fence Gates

Jerith style 202 at 54 inches is made to make most local pool codes. Pool code requires 45 inches between the two innermost horizontal rails. This gate at 54 inches tall or higher should make most pool codes. The bottom horizontal rail is dropped with no pickets extending past it. A magnetic pool safety latch is included with this gate. Check your local building codes for the requirements to make pool code in your area.

Style 202 Arched and Double Gates

Arched gates are an option for Jerith style 202 gates. Arched Gates are made up to 60” wide, and Rainbow Gates cover up to a 10’ or 12’ opening. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates, which are made from industrial grade material. Estate Gates can span up to a 20’ opening.

Installing a 54H x 36W Style 202 gate

When installing a style 202 gate between two gate posts, leave an opening of 36 inches between the inside of the gate posts. You install the hinges and latch with the provided self tapping screws. If you are installing this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang this gate in the middle of a column, you will need to build a shim that allows the hinges to be installed to leave room for the gate to open. If possible, it is recommended to use blank gate posts when installing between columns. Our help articles and Jerith installation guides provide more information on installing gates.

  • Powder-coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Magnetic pool latch included
  • Self-closing hinges included
  • Limited lifetime warranty
  • Used with Jerith style 202 54H pool fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight12.5 lbs
Dimensions36 × 54 in
Color

Black, Bronze, White

Arched

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)