Jerith Style 200 Gate 72H x 48W

Jerith Style 200 Gate 72H x 48W


  • Aluminum Gate
  • Flat Top Rail
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
SKU: JT-200-72-48G

Jerith Style 200 Gate 72H x 48W

Jerith Style 200 aluminum gate is made to fit a 48 inch opening. Style 200 gates have 4 horizontal rails and alternating pressed spears to match the 72 inch tall style 200 aluminum fence panels. The alternating pressed spears provide a more decorative look compared to Jerith style 202. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. Style 200 gates are sold by their opening size, so a 48” gate fits into a 48” opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.

You have an option of using decorative finials instead of the standard pressed spears. Jerith style 200 48 inch wide gate has 5 vertical pressed spear pickets so you will need 5 finials. Jerith will cut the pressed spears off of the fence panels to allow installation of the decorative finials.

Aluminum Pool Fence Gates

Jerith style 200 at 72 inches will make most local pool codes. Standard pool code requires 45 inches between the two innermost horizontal rails. This gate in 54 inches tall or higher should make most pool codes. Check your local building codes for the requirements to make pool code in your area.

Style 200 Arched and Double Gates

Arched gates are an option for most Jerith style 200 gates. Arched Gates are made up to 60” wide and Rainbow Gates cover up to a 10’ or 12’ opening. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) are used to create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates which are made from Industrial material. Estate Gates can span up to a 20’ opening.

Installing a 72H x 48W Style 200 gate

When installing a style 200 gate between two gate posts, leave an opening of 48 inches between the inside of the gate posts. Install the hinges and latch with the provided self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be installed and be able to open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and Jerith installation guides provide more information on installing Jerith gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self closing hinges included
  • Limited lifetime warranty
  • Flat top rail
  • Alternating pressed spears
  • Used with Jerith style 200 72H fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight19.5 lbs
Dimensions48 × 72 in

Black, Bronze, White


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)