Jerith Style 200 Gate 54H x 72W

Jerith Style 200 Gate 54H x 72W


  • Aluminum Gate
  • Pool Code Gate
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
SKU: JT-200-54-72G
  • Description
  • Additional information

Jerith Style 200 Gate 54H x 72W

Jerith style 200 aluminum gate is made to fit a 72 inch opening. Style 200 gates have a flat top rail and alternating pressed spears to match 54 inch tall style 200 aluminum pool fence panels. The alternating pressed spears provide a more decorative look compared to Jerith style 202. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Style 200 gates are sold by their opening size, so a 72” gate fits into a 72” opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.

You have an option of using decorative finials instead of the standard pressed spears. Style 200 has 8 vertical pickets so you will need 8 finials. Jerith will cut the pressed spears off of the fence panels to allow installation of the decorative finials. Installation guides provided by Jerith can be found in our help section.

Aluminum Pool Fence Gates

Jerith style 200 at 54 inches is made to make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. This gate at 54 inches tall or higher should make most pool codes. The bottom horizontal rail is dropped with no pickets extending past it. Check your local building codes for the requirements to make pool code in your area.

Style 200 Arched and Double Gates

Arched gates are not available for a 72W gate due to the arch being minimal per Jerith. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates which are made from Industrial material. Estate Gates can span up to a 20’ opening

Installing a 54H x 72W Style 200 gate

When installing a style 200 aluminum gate between two gate posts, leave an opening of 72 inches between the inside of the gate posts. Install the hinges and latch with the provided self tapping screws. To hang the gate between an existing surface that is wider than 2 inches, you will have to install the hinges on the corner of the surface. To hang the gate in the middle of the surface, you will need to build a shim that will allow the hinges to be attached and be able to open. If possible, it is recommend to use blank gate posts when installing a gate between columns. Our help articles and Jerith installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self closing hinges included
  • Limited lifetime warranty
  • Used with Jerith style 200 54H pool fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight21 lbs
Dimensions72 × 54 in

Black, Bronze, White

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)