Jerith Style 200 Gate 54H x 36W
$355.50 – $453.36
- Aluminum Gate
- Pool Code Gate
- Welded Frame
- “A” Brace for Strength
- Self Closing Hinges Included
- Latch Included
- Additional information
Jerith Style 200 Aluminum Gate 54H x 36W
Jerith style 200 aluminum gate fits a 36 inch opening between gate posts. Style 200 gates have a flat top rail, and alternating pressed spears to match 54 inch tall style 200 aluminum pool fence panels. The alternating pressed spears provide a more decorative look compared to Jerith style 202. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. A 36 inch wide Jerith Style 200 gate fits into a 36” opening between gate posts. Jerith gates are powder coated for a maintenance-free, rustproof finish. The finish is between shiny and matte.
Aluminum Pool Fence Gates
Jerith style 200 at 54 inches should make most local pool codes. Most pool codes require 45 inches between the two innermost horizontal rails. This gate at 54 inches tall or higher should make most pool codes. The dropped bottom horizontal rail has no pickets extending past it. Check your local building codes for the requirements to make pool code in your area.
You have the option of using decorative finials instead of the standard pressed spears. Style 200 has 4 vertical pickets, so you will need 4 finials. Jerith will cut the pressed spears off the fence panels to install the decorative finials.
Style 200 Arched and Double Gates
Arched gates are an option for Jerith style 200 gates. Arched Gates are made up to 60” wide, and Rainbow Gates cover up to a 10’ or 12’ opening. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) form a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates, which are industrial grade material. Estate Gates can span up to a 20’ opening.
Installing a 54H x 36W Style 200 gate
When installing a style 200 aluminum gate between two gate posts, leave an opening of 36 inches between the inside of the gate posts. Install the hinges and latch with the provided self tapping screws. To hang the gate between existing columns wider than 2 inches, you will have to install the hinges on the column’s corner. To hang the gate in the middle of the surface, you will need to build a shim that will allow the hinges to be attached so a gate can swing open. If possible, use blank gate posts when installing a gate between columns. Our help articles and Jerith installation guides provide more information on installing gates.
- Aluminum gate
- Made in the USA
- Welded frame
- “A” Brace for Strength
- Locking latch included
- Self closing hinges included
- Limited lifetime warranty
- Used with Jerith style 200 54H pool fence panels
Fence panels, posts, and accessories sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.
|Dimensions||36 × 54 in|
Black, Bronze, White