Jerith Style 100 Gate 36H x 48W

Jerith Style 100 Gate 36H x 48W


  • Aluminum Gate
  • Pressed Spear Tops
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
SKU: JT-100-36-48G

Jerith Style 100 Gate 36H x 48W

Jerith Style 100 aluminum gate is made to fit a 48 inch opening. Style 100 gates have alternating pressed spear tops to match the 36 inch tall style 100 aluminum fence panels. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The pressed spear pickets slot down through pre-cut holes in the middle of the horizontal rails. Style 100 gates are sold by their opening size, so a 48” gate fits into a 48” opening between posts. Jerith gates are powder coated for a maintenance free, rustproof finish. The finish is between shiny and matte.

Style 100 Arched and Double Gates

Arched gates are not available for Jerith style 100 gates due to the alternating pickets. If you would like an arched gate, order a style 101 gate and choose the arched option. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates, which are made from Industrial material. Estate Gates can span up to a 20’ opening.

Installing a 36H x 48W Style 100 gate

When installing a style 100 gate between two gate posts, leave an opening of 48 inches between the inside of the gate posts. You install the hinges and latch with the provided self-tapping screws. If you are installing this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To install the gate in the middle of a column, you will need to build a shim that will allow the hinges to be installed so a gate can swing open. If possible, it is recommended to use blank gate posts when installing between columns. Our help articles and Jerith installation guides provide more information on installing gates.

  • Powder-coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self-closing hinges included
  • Limited lifetime warranty
  • Used with Jerith style 100 36H fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight12.5 lbs
Dimensions48 × 36 in

Black, Bronze, White

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)