Jerith Ovation Gate 48H x 72W

Jerith Ovation Gate 48H x 72W

$384.77

  • Aluminum Gate
  • Flat Top Rail
  • Welded Frame
  • Self Closing Hinges Included
SKU: JT-OV-48-72G
Clear
  • Description
  • Additional information

Jerith Ovation Gate 48H x 72W

Jerith Ovation aluminum gate 48 inches tall by 72 inches wide is made to fit a 72 inch opening. Ovation gates have a flat top rail and is made to match 48 inch tall Ovation aluminum fence panels. Jerith gates have a welded frame for strength and durability. Jerith Ovation aluminum gates are mid grade which can support 500 lbs of pressure on the top rail. Ovation belongs to the Regency line of fences, which are thicker and stronger than standard residential fence panels. Ovation gates are sold by their opening size, so a 72” gate fits into a 72” opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.

Aluminum Pool Fence Gates

Jerith Ovation 72 inch wide gate comes with a crossbar to keep the gate from sagging over time. This gate will not make most pool codes due to the crossbar. Check your local building codes for the requirements to make pool code in your area.

Ovation Arched and Double Gates

Arched gates are not available for an Ovation 72W gate due to the arch being minimal per Jerith. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use our more decorative Estate Gates which are made from industrial grade material. Estate Gates can span up to a 20’ opening.

Installing a 48H x 72W Ovation gate

When installing a Ovation gate between two gate posts, leave an opening of 72 inches between the inside of the gate posts. Install the hinges and latch with the provided self tapping screws. If you would like to hang this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached and be able to open. If possible, it is recommend to use blank gate posts when installing a gate between columns. Our help articles and Jerith installation guides provide more information on aluminum gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • Self closing hinges included
  • Limited lifetime warranty
  • 20 Inch magnetic latch included
  • Used with Jerith Ovation 48H fence panels

Ovation panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight10 lbs
Dimensions72 × 48 in
Color

Black, Bronze, White

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)