Jerith Ovation Gate 48H x 36W
$316.42 – $403.52
- Aluminum Gate
- Flat Top Rail
- Welded Frame
- Self Closing Hinges Included
- Pool Latch Included
- Additional information
Jerith Ovation Gate 48H x 36W
Jerith Ovation aluminum gate is 48 inches tall by 36 inches wide and made to fit a 36 inch opening. Ovation gates have a flat top rail and is made to match 48 inch tall Ovation aluminum fence panels. Jerith gates have a welded frame for strength and durability. Jerith Ovation aluminum gates are mid grade which can support 500 lbs of pressure on the top rail. Ovation belongs to the Regency line of fences, which are thicker and stronger than standard residential fence panels. Ovation gates are sold by their opening size, so a 36” gate fits into a 36” opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.
Aluminum Pool Fence Gates
Jerith Ovation gates at 48 inches tall are made to make most local pool codes. Pool code requires 45 inches between the two innermost horizontal rails. A magna latch or magnetic pool latch is included with this Ovation gate. Check your local building codes for the requirements to make pool code in your area.
Ovation Arched and Double Gates
Arched gates are an option for Jerith Ovation gates and are made up to 60” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) are used to create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates. For larger openings, use Jerith decorative Estate Gates which are made from industrial grade material. Estate Gates can span up to a 20’ opening.
Installing a 48H x 36W Ovation gate
When installing a Ovation gate between two gate posts, leave an opening of 36 inches between the inside of the gate posts. Install the hinges and latch with the provided self tapping screws. If you would like to hang this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached and be able to open. If possible, it is recommend to use blank gate posts when installing a gate between columns. Our help articles and Jerith installation guides provide more information on aluminum gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Welded frame
- Locking latch included
- Self closing hinges included
- Limited lifetime warranty
- 20 Inch magnetic latch included
- Used with Jerith Ovation 48H fence panels
Ovation panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.
|Dimensions||36 × 48 in|
Black, Bronze, White