Jerith Line Post 60H – Style 101
$27.56 – $37.49
- Aluminum Line Post
- Powder Coated
- Pre-routed Post
- Post Cap Included
- Used with Jerith 60H Style 101
- Additional information
Line Post for 60H Jerith Style 101
Jerith line posts are installed in the middle of two aluminum fence panels. Line posts have pre-routed holes punched on opposite sides to accommodate a fence panel on both ends. Line posts are used for installing fence panels in a straight run and come with screws to secure the fence panel to the post. Aluminum fence panels have a small protruding end on the horizontal rails that will slot into the pre-routed holes on the post. These aluminum line posts provide two feet extra to go into the ground. Standard pyramid post caps are included with the line post. Jerith line posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. These line posts are used with 60 inch tall style 101 aluminum fence panels. Standard residential grade post size is 2×2, but 2.5 x 2.5 sized posts are an option. Actual height of this line post is 82 inches long.
Installing a 60H Line Post
The most often used method is to dig a hole in the ground and cement the post in. Actual height of this line post is 82 inches long, to install 2 feet into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of the fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add a little gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes.
- Powder coated
- Aluminum line post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Used with Jerith style 101 60H fence panels
Panels, Gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith 60H line posts.
|Dimensions||82 × 2 × 2 in|
Black, Bronze, White