Jerith Line Post 42H – Style 101
$25.36 – $82.69
- Aluminum Line Post
- Powder Coated
- Pre-routed Post
- Used with Jerith 42H Style 101
- Additional information
Line Post for 42H Jerith Style 101
Jerith line posts are installed in the middle of two aluminum fence panels. Line posts have pre-routed holes punched on opposite sides to accommodate a fence panel on both ends. Line posts are used for installing fence panels in a straight run and come with screws to secure the fence panel to the post. Aluminum fence panels have a small protruding end on the horizontal rails that will slot into the pre-routed holes on the post. These aluminum line posts provide two feet extra to go into the ground. Standard pyramid post caps are included with the line post. Line posts have an option for a welded on base mount for mounting on hard surfaces. Jerith line posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. These line posts are used with 48 inch tall style 101 aluminum fence panels. Actual height of this line post is 70 inches long.
Installing a 42H Line Post
There are a few methods you can use to install line posts. The most often used method is to dig a hole in the ground and cement them in. Actual height of this line post is 70 inches long, to install 2 feet into the ground. If you want to mount the posts on a hard surface, you have the options of a base mount, welded base mount, or core drilling into the hard surface. Welded base mounts are installed by Jerith after cutting down the post to size. Jerith will weld on the base mount to add strength. Mounting bolts are not included and can be purchased at a local hardware store.
- Powder coated
- Aluminum post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Used with Jerith style 101 42H fence panels
Panels, Gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith 42H line posts.
|Dimensions||70 × 2 × 2 in|
Black, Bronze, White
|Welded Base Mount|