Jerith Gate Post 96H – Industrial 101
$178.93 – $327.37
- Aluminum Gate Post
- Powder Coated
- Post Cap Included
- Industrial Grade
- Post Brackets Included
- Used with Jerith 96H Industrial Style 101
- Additional information
Gate Post for 96H Jerith Industrial Style 101
Jerith Industrial gate posts are installed on both sides of an aluminum gate. Industrial gate posts are like blank posts with no holes punched for a fence panel to slot into. The gate post includes post brackets to attach a fence panel. Gate post wall thickness is 2x as thick as standard posts. The added wall thickness is to support the weight of a gate, and the opening and closing of a gate. Industrial gate posts can also be used when you want your gate to be on a corner. Industrial aluminum fence panels have a small protruding end on the horizontal rails that will slot into provided wall brackets. 4×4 and 6×6 gate post actual size is 144 inches. This provides four feet extra to go into the ground. Standard post caps are included with the gate post. Jerith gate posts are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. These 4×4 and 6×6 industrial gate posts are used with 96 inch tall Jerith style 101 industrial aluminum fence panels.
Installing a Jerith Industrial Gate Post
The most often used method is to dig a hole in the ground and cement the post in. Actual height of this industrial gate post is 4 x 4 x 144 and 6 x 6 x 144 inches. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of the fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes. FenceTown help articles have more information about installing gate posts.
- Powder coated
- Aluminum industrial post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.125″
- 4×4 and 6×6 sizes
- Post brackets included
- Used with Jerith style 101 96H industrial fence panels
Industrial fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith gate posts.
Black, Bronze, White