Jerith Gate Post 42H – Style 401

Jerith Gate Post 42H – Style 401


  • Aluminum Gate Post
  • Used with Style 401 Panels
  • Powder Coated
  • 0.125 Wall Thickness
  • Post Cap Included
SKU: JT-GP-42H-401
  • Description
  • Additional information

Gate Post for 42H Jerith Style 401

Jerith gate posts are installed on both sides of an aluminum gate. Gate posts have pre-routed holes punched on one side of the post to connect to a fence panel. Gate post wall thickness is twice as thick as standard posts. The added wall thickness is to support the weight of a gate, and the opening and closing of a gate. Gate posts can also be used when you want your gate to be on a corner. Gate posts come with screws to secure the fence panel into the post. Aluminum fence panels have a small protruding end on the horizontal rails that will slot into the pre-routed holes on the post. This aluminum gate post provides two feet extra to go into the ground. Standard post caps are included with the gate post. Gate posts have an option for a welded on base mount for mounting on hard surfaces. It is not recommended to use base mounts on gate posts due to the weight the posts have to handle. Jerith gate posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. This gate post is used with 42 inch tall Jerith style 401 aluminum fence panels.

Installing a Jerith Gate Post

There are a few methods you can use to install gate posts. The most often used method is to dig a hole in the ground and cement the post in. If you want to mount the posts on a hard surface, you have the options of a welded base mount, or core drilling into the hard surface. Welded base mounts are installed by Jerith after cutting down the gate post to fit a 42H 401 fence panel. Jerith will weld on the base mount to add strength. Mounting bolts are not included and can be purchased at a local hardware store. Jerith recommends core drilling gate posts. FenceTown help articles have more information about installing gate posts.

  • Powder coated
  • Aluminum gate post
  • Made in the USA
  • Post cap included
  • Limited lifetime warranty
  • Post wall thickness is 0.125
  • Used with Jerith style 401 42H fence panels

Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith gate posts.

Additional information

Weight7.4 lbs
Dimensions70 × 2 × 2 in

Black, Bronze, White

Welded Base Mount

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)