Jerith End Post 60H – Style Concord
$22.87 – $37.49
- Aluminum End Post
- Powder Coated
- Used with 60H Concord
- Post Cap Included
- Additional information
End Post for 60H Jerith Concord
Jerith end posts are installed at the end of aluminum fence panels. End posts have pre-routed holes punched on one side of the post to accommodate a fence panel. End posts are commonly used when your fence run ends next to a structure like a house. End posts are also used when you need an angle other than 90 degrees. End your fence run with an end post, then attach angle brackets on one of the blank sides of the post. You will then be able to angle a fence panel and continue the fence run. End posts come with screws to secure the fence panel into the post. Aluminum fence panels have a small protruding end on the horizontal rails that will slot into the pre-routed holes on the post. These aluminum end posts provide two feet extra to go into the ground. Standard post caps are included with the end post. Jerith end posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. This end post is used with 60 inch tall Concord aluminum fence panels. Standard residential grade post size is 2×2, but 2.5 x 2.5 sized posts are an option.
Installing an End Post
The most often used method is to dig a hole in the ground and cement the post in. Actual height of this end post is 82 inches long, to install 2 feet into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of a 60 inch tall fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add a little gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes. FenceTown help articles have more information about installing end posts.
- Powder coated
- Aluminum post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- Post wall thickness is 0.060
- Used with Jerith Concord 60H fence panels
Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith end posts.
Black, Bronze, White