Jerith End Post 57H – Style 101

Jerith End Post 57H – Style 101

$27.56$86.00

  • Aluminum End Post
  • Powder Coated
  • Post Cap Included
  • 82 Inches Tall
  • Used with 57H Style 101 Panels
SKU: JT-EP-57H-101
Clear
  • Description
  • Additional information

End Post for 57H Jerith Style 101

Jerith end posts are installed at the end of aluminum fence panels. End posts have pre-routed holes punched on one side of the post to accommodate a fence panel. End posts are commonly used when your fence run ends next to a structure like a house. End posts are also used when you need an angle other than 90 degrees. End your fence run with an end post. then attach angle brackets on one of the blank sides of the post. You will then be able to angle a fence panel and continue the fence run. End posts come with screws to secure the fence panel into the post. Aluminum fence panels have a small protruding end on the horizontal rails that will slot into the pre-routed holes on the post. These aluminum end posts provide two feet extra to go into the ground. Standard post caps are included with the end post. End posts have an option for a welded on base mount for mounting on hard surfaces. Jerith end posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. This  end post is used with 57 inch tall style 101 aluminum fence panels.

Installing an End Post

There are a few methods you can use to install end posts. The most often used method is to dig a hole in the ground and cement them in. If you want to mount the posts on a hard surface, you have the options of a welded base mount, or core drilling into the hard surface. Welded base mounts are installed by Jerith after cutting down the end post to fit a 57H 101 fence panel. Jerith will weld on the base mount to add strength. Mounting bolts are not included and can be purchased at a local hardware store. FenceTown help articles have more information about installing end posts.

  • Powder coated
  • Aluminum post
  • Made in the USA
  • Post cap included
  • Limited lifetime warranty
  • Post wall thickness is 0.060
  • Used with Jerith style 101 57H fence panels

Panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith end posts.

Additional information

Weight4.4 lbs
Dimensions82 × 2 × 2 in
Color

Black, Bronze, White

Size

2×2, 2.5×2.5

Welded Base Mount

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)