Jerith Style Concord Gate 72H x 60W

Jerith Style Concord Gate 72H x 60W


  • Aluminum Gate
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Latch Included
  • Decorative Gate
SKU: JT-Concord-72-60G
  • Description
  • Additional information

Jerith Concord Gate 72H x 60W

Jerith Concord aluminum gate is made to fit a 60 inch opening. Jerith Concord gates have pressed spears, curved pickets, and four horizontal rails to match 72 inch tall Concord aluminum fence panels. Jerith gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The aluminum pickets slot down through pre-cut holes in the middle of the horizontal rails. Concord gates are sold by their opening size, so a 60 inch gate fits into a 60 inch opening between posts. Jerith gates are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte.

Decorative finials are an option instead of the standard pressed spear tops. You would need 6 decorative finials to replace the pressed spear tops on this 60 inch wide gate. Jerith will cut the pressed spears off of the fence panels and gates.

Aluminum Pool Fence Gates

Jerith Concord at 72 inches tall will make most local pool codes. Standard pool code requires 45 inches between the two innermost horizontal rails. Concord in 57 inches tall or higher should make most pool codes. Check your local building codes for the requirements to make pool code in your area.

Concord Arched and Double Gates

Arched gates are not an option for Jerith Concord gates. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates.

Installing a 72H x 60W Concord gate

When installing a Concord gate between two gate posts, leave an opening of 60 inches between the inside of the gate posts. You install the hinges and latch with the provided self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be installed and be able to open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and Jerith installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Locking latch included
  • Self closing hinges included
  • Limited lifetime warranty
  • Used with Jerith Concord 72H fence panels

Panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Jerith aluminum gates.

Additional information

Weight23 lbs
Dimensions60 × 72 in

Black, Bronze, White

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)