Jerith Blank Gate Post 60H – Style Concord

Jerith Blank Gate Post 60H – Style Concord


  • Aluminum Blank Gate Post
  • Powder Coated
  • 0.125 Wall Thickness
  • 82 Inches Long
  • Post Cap Included
SKU: JT-BGP-60H-Concord
  • Description
  • Additional information

Blank Gate Post for 60H Jerith Concord

Jerith blank gate posts can be installed on both sides of an aluminum gate. Blank gate posts have no holes punched on any side of the post. Blank gate post wall thickness is twice as thick as standard posts. The added wall thickness is to support the weight of a gate, and the opening and closing of a gate. Blank gate posts can also be used when you want your gate to be on a corner, and you need to make an angle other than 90 degrees. Use angle brackets on one side of the blank gate post to angle a fence panel. You should also use a blank gate post when you want to install a gate next to a house or structure. This aluminum blank gate post provides two feet extra to go into the ground. Standard post caps are included with the blank gate post. It is not recommended to use base mounts on blank gate posts due to the weight the posts have to handle. Jerith blank gate posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. These blank gate posts are used with 60 inch tall Jerith Concord aluminum fence panels.

Installing a Blank Gate Post

The most often used method is to dig a hole in the ground and cement the post in. Actual height of this blank gate post is 82 inches long, to install 2 feet into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of a 60 inch tall fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add a little gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes. FenceTown help articles have more information about installing blank gate posts.

  • Powder coated
  • Aluminum post
  • Made in the USA
  • Post cap included
  • Limited lifetime warranty
  • Post wall thickness is 0.125
  • Used with Jerith Concord 60H fence panels

Panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith blank gate posts.

Additional information

Weight8.8 lbs
Dimensions82 × 2 × 2 in

Black, Bronze, White

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)