Jerith Blank Gate Post 42H – Style 101

Jerith Blank Gate Post 42H – Style 101


  • Aluminum Blank Gate Post
  • Used with Style 101 Panels
  • Powder Coated
  • 0.125 Thickness
  • 70 Inches Tall
SKU: JT-BGP-42H-101
  • Description
  • Additional information

Blank Gate Post for 42H Jerith Style 101

Jerith blank gate posts can be installed on both sides of an aluminum gate. Blank gate posts have no holes punched on any side of the post. Blank gate post wall thickness is 2x as thick as standard posts. The added wall thickness is to support the weight of a gate, and the opening and closing of a gate. Blank gate posts can also be used when you want your gate to be on a corner, and you need to make an angle other than 90 degrees. Use angle brackets on one side of the blank gate post to angle a fence panel. You should also use a blank gate post when you want to install a gate next to a house or structure. This aluminum blank gate post provides two feet extra to go into the ground. Standard post caps are included with the blank gate post. blank gate posts have an option for a welded on base mount for mounting on hard surfaces. It is not recommended to use base mounts on blank gate posts due to the weight the posts have to handle. Only a small gate can be supported with base mounts. Jerith blank gate posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. These blank gate posts are used with 42 inch tall Jerith style 101 aluminum fence panels.

Installing a Blank Gate Post

There are a few methods you can use to install blank gate posts. The most often used method is to dig a hole in the ground and cement the post in. If you want to mount the posts on a hard surface, you have the options of a base mount, welded base mount, or core drilling into the hard surface. Welded base mounts are installed by Jerith after cutting down the blank gate post to fit a 42H 101 fence panel. Jerith will weld on the base mount to add strength. Mounting bolts are not included and can be purchased at a local hardware store. FenceTown help articles have more information about installing blank gate posts.

  • Powder coated
  • Aluminum post
  • Made in the USA
  • Post cap included
  • Limited lifetime warranty
  • Post wall thickness is 0.125
  • Used with Jerith style 101 42H fence panels

Panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith blank gate posts.

Additional information

Weight7.4 lbs
Dimensions70 × 2 × 2 in

Black, Bronze, White

Welded Base Mount

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)