Jerith 4×4 Gate Post 42H – Style 401

Jerith 4×4 Gate Post 42H – Style 401


  • Aluminum 4×4 Gate Post
  • Used with Style 401 Panels
  • Powder Coated
  • 84 Inches Tall
  • Post Cap Included
SKU: JT-4x4GP-42H-401
  • Description
  • Additional information

Jerith 4×4 Gate Post for 42H Style 401

Jerith 4×4 gate posts can be installed on both sides of an aluminum gate. Jerith 4×4 gate posts have no holes punched on any side of the post. 4×4 gate post wall thickness is twice as thick as standard posts. The added wall thickness is to support the weight of a gate, and the opening and closing of a gate. 4×4 gate posts can also be used when you want your gate to be on a corner, and you need to make an angle other than 90 degrees. Use angle brackets on one side of the 4×4 gate post to angle a fence panel. You can also use a 4×4 gate post when you want to install a gate next to a house or structure. This aluminum 4×4 gate post provides four feet extra to go into the ground, and can be trimmed down if desired. Standard post caps are included with this gate post. It is not recommended to use base mounts on 4×4 gate posts due to the weight the posts have to handle. Jerith 4×4 gate posts are powder coated for a maintenance free, rust proof finish. The finish is in-between shiny and matte. This gate post is used with 42 inch tall Jerith style 401 aluminum fence panels and are a total of 84 inches tall. Mounting brackets are included with this post to attach a fence panel. 4×4 gate posts are commonly used when purchasing a commercial grade gate, of if you want your gate posts to look larger.

Installing a 4×4 Gate Post

There are a few methods you can use to install 4×4 gate posts. The most often used method is to dig a hole in the ground and cement the post in. If you want to mount the posts on a hard surface, you should core drill into the hard surface and cement in the post. If your project has fence panels on either side of the gate, use the provided post mounting brackets to attach the panel to the post. FenceTown help articles have more information about installing 4×4 gate posts.

  • Powder coated
  • Aluminum post
  • Made in the USA
  • Post cap included
  • Limited lifetime warranty
  • Post wall thickness is 0.125
  • Used with Jerith style 401 42H fence panels
  • 84 inches tall

Panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Jerith 4×4 gate posts.

Additional information

Weight18.7 lbs
Dimensions84 × 4 × 4 in

Black, Bronze, White

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)