Gilpin Fairfield Aluminum Railing Panel 36H x 96W
- Aluminum Railing
- Powder Coated
- Breadloaf Top Rail
- Three Rails
- 96 Inches Wide
- Not Sold Separately
- Railing Specifications
- Additional information
Fairfield Aluminum Railing Panel 36″ x 96″
Gilpin Fairfield aluminum railing panel 36 inches high by 96 inches wide. Railing panels are powder coated which will prevent peeling and cracking. Fairfield railings come in fully assembled pre-cut panel heights and widths. The installed height of this Fairfield railing panel is 33 inches. This leaves 3 inches below the bottom horizontal rail and the hard surface you are mounting to. The 96 inch wide railing panels have 2 pickets near the center that extend past the bottom rail. These pickets brace the panel and a decorative spindle flange can be used to hold them in place. Fairfield railing comes with a breadloaf style top rail. Breadloaf rails provide more comfort on your hands then a square or flat shaped top rail. Fairfield railing is made in the USA and has a limited lifetime warranty. Fairfield railing is the highest grade aluminum railing that the brand Gilpin manufacturers.
A 96 inch wide railing panel is best used for near to the ground applications. This railing should not be used for off the ground heights of more than a few feet. For safety reasons, it’s better to use shorter railing widths for areas that are higher up. The railing will meet most railing codes, but check your local building codes prior to installation.
The vertical spindles or pickets are attached with a stainless steel rivet, that is covered by aluminum rivet covers. Rivet covers are included with the railing panel and result in a cleaner look. The rivets allow the railing panel to rack at an angle for stairs when using angle brackets. The railing panels will remain in a straight position when using the post or wall mount brackets. Fairfield aluminum railing panels are commonly used on decks, patios, and balconies and for residential or commercial applications.
Shipping a 96 Inch Wide Railing Panel
Due to the size of this railing panel, it can not be shipped by itself or individually. You will have to order more than 3 panels as shipping less increases the possibility of shipping damage. Because these railing panels are oversize, the shipping cost is higher as well. Use our quote form located at the link at the top of the website, and we will help you determine the best options for your project.
Fairfield Railing Installation
You can attach Fairfield railing to posts in three different ways. For a straight rail, use either the installation spindle or a wall mount bracket. The installation spindle will look like the other vertical pickets. Installation spindles have a screw hole for installing on the top and bottom of the picket. Wall brackets and angle brackets fit on the end of the horizontal rails and attach to a wall or post. They have two screw holes on each side of the bracket for added strength. You may want to add Decorative Spindle Flanges to secure the two bottom extended pickets to the flat surface. Trim down the railing panel with a hacksaw or reciprocating saw if you need shorter lengths.
- Top Rail: 2.5 inches
- Pickets: 5/8″ square – 0.65 thick
- Picket Spacing: 4″ on center.
- Posts: 2.5″ Square – 0.70 thick.
- Panel Mounted Height: 36 inches
- Panel Actual Height: 33 inches
- Colors: Black, White
Posts and accessories are sold separately.
Our help articles contain more information on Fairfield railing.
|Dimensions||96 × 33 in|