Elite EFS-15 Gate 54H x 36W

Elite EFS-15 Gate 54H x 36W


  • Aluminum Gate
  • Welded Frame
  • Spear Top Rail
  • Pool Code Gate
  • Self Closing Hinges Included
  • Latch Included
SKU: EL-EFS-15-54-36G

Elite EFS-15 Aluminum Gate 54H x 36W

This Elite EFS-15 aluminum gate is 54 inches tall by 36 inches wide and fits a 36 inch opening between gate posts. EFS-15 gates have alternating pressed spear top pickets to match 54 inch tall EFS-15 aluminum fence panels. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Standard Elite gates have a crossbar or brace to keep the gate from sagging over time. Elite gates are made in the USA and powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Elite EFS-15 gate comes with self closing hinges and a handle latch. Elite standard fence panels and gates have visible screws on one side of the horizontal rails.

Swimming Pool Gate

Elite EFS-15 gates at 54 inches tall should make most local swimming pool fence codes. Most pool codes require 45 inches between the two innermost horizontal rails, so children can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.

EFS-15 Arched and Double Gates

Arched gates are an option for Elite EFS-15 54 inch tall gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.

Decorative Finials

You have the option of using decorative finials instead of the standard alternating pressed spears. You would need 7 decorative finials to replace the pressed spear tops on this gate. Elite will cut the alternating pressed spears off the fence panels to allow for the installation of the decorative finials.

Installing a 54H x 36W EFS-15 Gate

The actual gate size is 34.5 inches which allow 1.5 inches to attach the hinges and latch. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Self closing hinges included
  • Latch included
  • Limited lifetime warranty
  • Arched gate available
  • Used with Elite EFS-15 54H fence panels

Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.

Additional information

Weight12.5 lbs
Dimensions36 × 54 in

Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)